1/72 SSN 22 Connecticut

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wlambing
    SubCommittee Member
    • Feb 2003
    • 848

    #61
    Be Happy! BTW, do they make Penfield t-shirts, too??? Just wonderin'.

    B^)

    Comment

    • eckloss
      • Nov 2003
      • 1196

      #62
      I believe it was Penfold. "Penfold, SHUSH!"
      Last edited by eckloss; 08-28-2016, 03:32 PM.

      Comment

      • eckloss
        • Nov 2003
        • 1196

        #63
        theres actually quite a few

        Click image for larger version

Name:	Screen Shot 2016-08-28 at 4.31.35 PM.jpg
Views:	1
Size:	7.5 KB
ID:	129495

        Comment

        • eckloss
          • Nov 2003
          • 1196

          #64
          So here is the hull below the waterline in its final clear coat. I gave up on trying to get the algae just right. it is what it is. which is done. i tried to give the hull a look of quite a bit of salt deposits and a kind of tiger striping effect. so yeah. time to move on.

          Click image for larger version

Name:	IMG_2508.jpg
Views:	1
Size:	94.5 KB
ID:	129515Click image for larger version

Name:	IMG_2509.jpg
Views:	1
Size:	95.7 KB
ID:	129516Click image for larger version

Name:	IMG_2510.jpg
Views:	1
Size:	96.4 KB
ID:	129517

          Comment

          • wlambing
            SubCommittee Member
            • Feb 2003
            • 848

            #65
            Erich,

            Ya done good!

            B^)

            Comment

            • eckloss
              • Nov 2003
              • 1196

              #66
              thanks, bill. i honestly can't decide if it passes or looks like shite. but it is what it is at this point

              Comment

              • eckloss
                • Nov 2003
                • 1196

                #67
                This morning I've installed some heavy brass strip, bent in a slight z shape, to the underside of the upper bow piece on either side. they slide under the main hull with a bit of tension holding them close to the hull thanks to the z bend. in the rear of the upper deck, one screw holds the entire assembly down.

                Click image for larger version

Name:	IMG_2512.jpg
Views:	1
Size:	87.1 KB
ID:	129522Click image for larger version

Name:	IMG_2513.jpg
Views:	1
Size:	84.5 KB
ID:	129523Click image for larger version

Name:	IMG_2514.jpg
Views:	1
Size:	88.0 KB
ID:	129524Click image for larger version

Name:	IMG_2515.jpg
Views:	1
Size:	82.2 KB
ID:	129525

                Comment

                • eckloss
                  • Nov 2003
                  • 1196

                  #68
                  fixed cleats are installed (six total)

                  Click image for larger version

Name:	IMG_2518.jpg
Views:	1
Size:	91.9 KB
ID:	129526

                  I also wanted the sail to be removable. so i evercaated in some bolts.

                  Click image for larger version

Name:	IMG_2516.jpg
Views:	1
Size:	97.4 KB
ID:	129527Click image for larger version

Name:	IMG_2517.jpg
Views:	1
Size:	85.3 KB
ID:	129528

                  Comment

                  • eckloss
                    • Nov 2003
                    • 1196

                    #69
                    It's starting to look like a submarine

                    Click image for larger version

Name:	IMG_2519.jpg
Views:	1
Size:	93.3 KB
ID:	129529Click image for larger version

Name:	IMG_2520.jpg
Views:	1
Size:	94.3 KB
ID:	129530Click image for larger version

Name:	IMG_2521.jpg
Views:	1
Size:	95.4 KB
ID:	129531

                    Comment

                    • eckloss
                      • Nov 2003
                      • 1196

                      #70
                      Working on the sail a bit

                      Click image for larger version

Name:	IMG_2525.jpg
Views:	1
Size:	88.3 KB
ID:	129532Click image for larger version

Name:	IMG_2526.jpg
Views:	1
Size:	88.1 KB
ID:	129533Click image for larger version

Name:	IMG_2527.jpg
Views:	1
Size:	87.4 KB
ID:	129534Click image for larger version

Name:	IMG_2528.jpg
Views:	1
Size:	86.4 KB
ID:	129535

                      Comment

                      • eckloss
                        • Nov 2003
                        • 1196

                        #71
                        I've got one week until sea trials. I think I might just make it.

                        Click image for larger version

Name:	IMG_2529.jpg
Views:	1
Size:	93.2 KB
ID:	129536Click image for larger version

Name:	IMG_2530.jpg
Views:	1
Size:	91.3 KB
ID:	129537

                        Comment

                        • JWLaRue
                          Managing Editor, SubCommittee Report
                          • Aug 1994
                          • 4281

                          #72
                          She's looking very good, Erich!

                          -Jeff
                          Rohr 1.....Los!

                          Comment

                          • thor
                            SubCommittee Member
                            • Feb 2009
                            • 1479

                            #73
                            Excellent work, Erich!
                            Regards,

                            Matt

                            Comment

                            • eckloss
                              • Nov 2003
                              • 1196

                              #74
                              Nothing really picture-worthy, but the 22 is partially trimmed (surface trim right now)....I'll be finishing it up tomorrow, just in time to take to Groton for sea trials this weekend.m

                              Comment

                              • eckloss
                                • Nov 2003
                                • 1196

                                #75
                                Finally in submerged trim. Took a lot of foam.

                                Looks like I made the deadline. Just. Can't wait to see how she does on the lake Saturday.

                                Click image for larger version

Name:	IMG_2534.jpg
Views:	1
Size:	96.8 KB
ID:	129562

                                Comment

                                Working...