My boat has Motroniks Viper Marine 10, LipoGuard, WFLY wft08x trans, SombraLabs Receiver, 480 brushed motor, ES2 module for airpump and solenoid pressure valve. When I push the boat to run at full throttle, the ES2 power is cut off. Cannot five or surface. The LipoGuard light becomes red, green, blank, green. Before it happens my LipoGuard lights are R, G, G, G. Or 2 G.
After turning power off, then on, light turns to normal and works as it should.
I tested it on the bench with identical parts but no ES2 instead a servo. It did not lose power.
What is going on? Help. Thanks in advance.
After turning power off, then on, light turns to normal and works as it should.
I tested it on the bench with identical parts but no ES2 instead a servo. It did not lose power.
What is going on? Help. Thanks in advance.
Comment