1/72 Nautilus

[Rogue Sub]

Here are some CAD snapshots of the up and coming 1/72 Nautilus from Rogue Sub Works
More to come as they come in.
Remember to reserve your place in line on this boat by sending an email to me at
Kevin@roguesubworks.com

I also have something very special in the works for one very lucky customer!

Kevin

[Rogue Sub]

Re: 1/72 Nautilus

Here is a link to the build in progress.

http://www.subpirates.com/showthread.php?t=4231

Should have some more pictures shortly

[Rogue Sub]

Re: 1/72 Nautilus

Here are some early renderings of the hull of the boat. There have been a few set backs in the rendering of this hull as some of the plans received for the hull did not align properly once loaded into CAD. The stations for the boat were all off. Luckily original Nautilus drawings were available for use to fix the problem and we have ended up with an even more accurate boat.

[Rogue Sub]

Re: 1/72 Nautilus

couple new shots to share with more framing in place

[raalst]

Re: 1/72 Nautilus

The owner of this forum has requested me to remove some posts,
after he had collected the approval to do so from the people posting.

All please keep in mind that the vendor forums are the domain of the vendor, they have been given
separate forums to showcase their products, general discussion with them can be had elsewhere.
Discussion in a vendor forum should focus on the products showcased.

[Rogue Sub]

Re: 1/72 Nautilus

Thank you everyone.

I have added some more pictures to the historical Nautilus section of my site for those interested

[Rogue Sub]

Re: 1/72 Nautilus

Here are some update shots of the hull. 60% of the hull has been skinned.Work has been difficult fixing the bow because it seems every drawing has some kind of error that doesnt match with the others. Hope to have it ready for the machine this week, pending good weather.

[Rogue Sub]

Re: 1/72 Nautilus

Quick update as the bow comes together.

[Rogue Sub]

Re: 1/72 Nautilus

The bow is complete!

[Rogue Sub]

Re: 1/72 Nautilus

nearly ready to go!

[Rogue Sub]

Re: 1/72 Nautilus

A small imperfection in the bow was fixed

[Rogue Sub]

Re: 1/72 Nautilus

Small update on the propeller support fin

[Rogue Sub]

Re: 1/72 Nautilus

Stern planes have been completed and attached the the boat in CAD. Heading back to the Nautilus now to get measurements of the anchor well.

[Rogue Sub]

Re: 1/72 Nautilus

Rudder has been completed and added to the boat now

[Rogue Sub]

Re: 1/72 Nautilus

Couple beauty shots