ALCON,
The attached file was designed to replace the "stock" Dorsal and Ventral Rudders on the 1:48 Scale DeBoer SKIPJACK Class Submarine. It is to scale, based off the G. SHARPE Plans and can be used for either the upper (dorsal) or lower (ventral) rudder. A 1/8" diameter thru hole is provided for the rudder stock. You can use that to feed wires through for lighting.
It was Designed using TinkerCad online 3D Modeling Tool. I had successful printing in ABS on the Monoprice Voxel 3D printer (rebranded FlashForge Adventurer III).
It was then cleaned up and used to make a Master.
Enjoy!
Disclaimer
By downloading this content, you agree:
1-That you are using it/them BY YOUR OWN CHOICE AT YOUR OWN RISK, without warranty AND/OR guarantee of any kind (either expressed or implied).
2-That the author of this content will not be held responsible or liable for any injury or harm you and/or others sustain, and/or damage/loss to your property and/or other owners property
as a result of information obtained from this content, or information shared in this content. This includes emails, videos and text.
3-The desired intent of this post is in the free sharing of information, it in no way claims to be the best, or even the preferred method to achieve the desired goal mentioned in the description. It is just content I use and wish to share.
4-It is NOT meant to discourage, much less replace, the use of commercially available products. In fact I HIGHLY recommend purchasing and using commercial products thereby keeping
these people in business. It's a small market, and many of them are personal friends.
Finally, Positive Comments are appreciated, negative comments are ignored with the understanding that to have downloaded it you agreed to the above anyway.
Thanks for your understanding.
Take this: 591_Rudder_00.zip
The attached file was designed to replace the "stock" Dorsal and Ventral Rudders on the 1:48 Scale DeBoer SKIPJACK Class Submarine. It is to scale, based off the G. SHARPE Plans and can be used for either the upper (dorsal) or lower (ventral) rudder. A 1/8" diameter thru hole is provided for the rudder stock. You can use that to feed wires through for lighting.
It was Designed using TinkerCad online 3D Modeling Tool. I had successful printing in ABS on the Monoprice Voxel 3D printer (rebranded FlashForge Adventurer III).
It was then cleaned up and used to make a Master.
Enjoy!
Disclaimer
By downloading this content, you agree:
1-That you are using it/them BY YOUR OWN CHOICE AT YOUR OWN RISK, without warranty AND/OR guarantee of any kind (either expressed or implied).
2-That the author of this content will not be held responsible or liable for any injury or harm you and/or others sustain, and/or damage/loss to your property and/or other owners property
as a result of information obtained from this content, or information shared in this content. This includes emails, videos and text.
3-The desired intent of this post is in the free sharing of information, it in no way claims to be the best, or even the preferred method to achieve the desired goal mentioned in the description. It is just content I use and wish to share.
4-It is NOT meant to discourage, much less replace, the use of commercially available products. In fact I HIGHLY recommend purchasing and using commercial products thereby keeping
these people in business. It's a small market, and many of them are personal friends.
Finally, Positive Comments are appreciated, negative comments are ignored with the understanding that to have downloaded it you agreed to the above anyway.
Thanks for your understanding.
Take this: 591_Rudder_00.zip
Comment