75mHz RFI issues

[southern or]

Re: 75mHz RFI issues

Yeah it's my frankinmitter F-14. So far receiver channels 1-5 are assigned and working great. Ch1 are the rudders, ch2 are the dive planes, ch3 and ch4 are the ESCs, and ch5 is the solo 3 stage switch that controls my dive controller (technically the dive controller is on ch2 also). I'm still wiring the ballast tank system so it'll be a bit before we see how it responds to the decoder.

[southern or]

Re: 75mHz RFI issues

All electrics have been wired up and tested. Everything works great. I changed the TAE2 channel from a dial to a three way dead man switch because the decoder lag just wasn't working out. On the floor with everything spread out it all ran great. Just a bit of a side note, all the wires needed for the TAE2 setup are crazy. I bundled what I could of them but I'm sure it'll look like a mess when it's all installed.

Thanks again,
JP