Started my RC conversion of ROG 1/72nd

[steve nuttall]

I have now made 2

I have now made 2 new pure teflon outboard bearings for the standard prop support; drilled out to 3.5mm and then the teflon bearing inserted; this the longer propshaft will ride on; the flange will be at the prop side of the outboard support and the teflon will take the thrust loads

[turbobearcat]

Used Alumuim bearings with Silicon

Used Alumuim bearings with Silicon grease...which has worked very well..I'm just waiting for the weather to warm up so I can go play!

Mark

[steve nuttall]

Well i had the teflon

Well i had the teflon sitting around; might as well use up all this stuff