Attention all registered users. The new forum upgrade requires you to reset your password as you logon for the first time.
To reset your password choose this option that is displayed when you attempted to login with your username: "Forgotten your password? Click here!"
You will be sent an e-mail to the address that is associated with your forum account. Follow the simple directions to reset your password.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
then spend as many weeks as you need to in order to read the relatively thick owners manual to figure out how to mix as many channels as you need to....
im using a JR8103 which has a ton of mixing functions...its not hard... i dont think you need to also mix the dive planes untill after you have the shaft mixes done and ran a few times to see if you even need a dive plane mix... but its easy to do with a little reading if you forgot the programming lol...
Get a Vantec RDFR ESC. The RDFR21 is the cheapest at $239.95.
now... say on port turn, do i also need to mix the diveplanes so the port would go up and the starboard down ??
Are you thinking of using the stern planes like ailerons on an airplane? I don't think that will work real good, especially with a TYPHOON - you'll be pitching the bow up or down with the turn. It's better to use a little up plane, if needed, in a turn.
Tweet
Comment