The one on the endcap I believe 124mm by 3.5mm thick. The one that is used on the end of the cylinder is 120mm by about 6.5mm wide 2.5 thick and 4mm thick on the L part of the O-ring as this is really a L-ring(o-ring) not a flat 6.5mm wide washer type rubber ring.
Thunder tiger Neptune
Collapse
X
-
Ken, on another forum I answered on the front gasket. So it is cool you answered here. The front gasket fits in a channel and you could get a good estimate of the thickness from that, my o-ring varied from 3.45 to 3.5mm I am not sure on the other one, it looks like you answered that question as well!If you can cut, drill, saw, hit things and swear a lot, you're well on the way to building a working model sub.
Comment
-
Comment