VIPER MARINE 20

[tabledancer]

I have this Viper Marine 20 ESC that I`m using in my Gato with one of Big Dave`s WTC.could someone out there please tell me what to do with the on/off slide switch that is attached to the Viper from the factory.There isn`t a whole lot of room in there for the switch to be inside the WTC.Thankyou in advance.


TD

[bigdave]

Hi TD,
You don't really

Hi TD,
You don't really need the switch, but I left mine connected and on tucked under the servos. Should be more than enough room. BD.

[bigdave]

Here is a photo of

Here is a photo of the switch on my 212 cylinder. It is just placed in the area under the servos or motors. If you don't want to deal with the switch just remove it and solder on a small Deans micro power connector to shorter wires. Just plug in the other half of the connector with the pins shorted to activate the ESC. Ihis looks better than just shorting the wires. BD.

[tabledancer]

Dave,
Thanks,I don`t know which way

Dave,
Thanks,I don`t know which way will be better for me,but you can bet that I will use one of them.

Good news,I`ll be ready to water test the battery and main WTC`S soon,got some picts of the progress so far.If you are interested I`ll send them your way.Still waiting for the SES III switch though .Take care now buddy.


TD

[bigdave]

Send away TD. http://www.subcommittee.com/forum/icon_biggrin.gif
I

Send away TD.
I would love to see them. BD.