ShipsnThings prop to suit an Albacore

[collins class]

Hi folks

I am interested in getting an aftermarket brass prop to suit the Subtech Albacore from ShipsNThings and am wondering who has fitted an aftermarket screw (http://www.shipsnthings.com/HTML/propel.htm) to their boat like this]http://www.shipsnthings.com/GRAPHICS/6bladeA.jpg[/img]

Al has asked me questions like shaft diameter (1/8th on the Albacore I believe, someone please correct me if I'm wrong) and prop direction. Looking on Al's page most of the props seem to require 3/16th shafts.

Any assistance, pics etc would be appreciated.

Thanks

Byron

[tmsmalley]

Standard prop - I suspect

Standard prop - I suspect you can buy one from Mike's SubWorks.



If you really want to get fancy - here is a shot of the Albacore's twin screws that she used in her final iteration]http://www.seacoastonline.com/2003news/4_6.jpg[/img]