Needs to find a Propeller for Seawolf! - 1/144 scale in size

[turbobearcat]

I was working on my Trumpeter kit today when I noticed that the 1.24 in prop is flat as a pancake! I searched the web for a brass or plastic prop for this model and I seem to can't find anything out there, I'm starting to stress out;

Can anybody help me out on this one?

Also noticed AFTER I put the propulser togetherr that the prop is shown on the outside rear and not inside, which is correct here?
I seen Dave's was inside but on the backside would be easier if you had to remove it right?

HELP HELP>> MAYDAY MAYDAY
S.O.S...

Mark

[collins class]

Mark

You might like to try

Mark

You might like to try one of these]http://www.goldmine-elec-products.com/images/G15250B.jpg[/img]
http://www.goldmine-elec-products.com/prodinf....mitem=1

I don't know if it will be large enough though.

Byron

[bigdave]

Good find Byron,
It is

Good find Byron,
It is small but for $1 it's worth a try. Dave.

[turbobearcat]

I might order 2 of

I might order 2 of them, one for my Kilo and the other for the Seawolf, one of those subs will have a nice prop!


Mark

[JWLaRue]

You could try gently heating

You could try gently heating the blades and giving them a proper twist.

...certainly have nothing to lose!

-Jeff

[turbobearcat]

Mark

You might like to try

Mark

You might like to try one of these]http://www.goldmine-elec-products.com/images/G15250B.jpg[/img]
http://www.goldmine-elec-products.com/prodinf....mitem=1

I don't know if it will be large enough though.

Byron

I knew this was too good to be true..
5mm wide and 22.2 mm tall...

one problem..

Min order of $10!

crap..

Mark

[collins class]

Dave, can you give some

Dave, can you give some dimensions on your copper blade?

Mark interested in the "minimum of 10" comment cause that never appeared to me when I did a test checkout but cancelled out.

Byron

[bigdave]

My blade is about 1.3

My blade is about 1.3 X .25" and has a very close tolerance inside the shroud. I am not sure about the minimum as I always make a big order. Lot's of cool stuff. Dave.

[turbobearcat]

Dave, can you give some

Dave, can you give some dimensions on your copper blade?

Mark interested in the "minimum of 10" comment cause that never appeared to me when I did a test checkout but cancelled out.

Byron

I called them direct last night, I told them I wanted to order 2 for now , she said is that all? I said yes, she said do you know we have a minium of $10 purchase order?

my heart sank to the bottom..

"no i did not"

now that suckd, I told my wife and she said " order someting else
and get wat you want" WOW! now that was suprise to hear.. so I'm going to order 4 of them and two going to the Wally word subs hehhe and the rest I will make use of.

Mark

[turbobearcat]

Oh ####, I just ordered

Oh ####, I just ordered 4 props and 4 motors to use so now I wait for my goods to show up!



Mark

[turbobearcat]

Well I got my order

Well I got my order in and I like what I see so far...for the Seawolf I'm not sure if it's going to be big enough but I will find out soon.
My restore project on my Shelby will be finishing soon, so now I will have the time to invest in my sub projects

[collins class]

Mark, so how did the

Mark, so how did the prop work out?? Was it worth the effort?

Byron

[turbobearcat]

For the Wallyworld subs YES!
I

For the Wallyworld subs YES!
I have no got to finish my Seawolf sub yet but I am waiting on parts to come in from 3 places right now!

Argggghhhhhh!

Mark