Mounting Fittings - What type of epoxy

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nelix6030
    Member
    • Dec 2003
    • 43
    #1

    Mounting Fittings - What type of epoxy

    I am starting to do the finish work on my first sub and I am ready to mount some of the metal hull detail. Whats a good glue to use. A small bit of 60 minute epoxy? SuperGlue?

    Any advice would be great. Hate to run the sub and have it comeback without all the details.

    Kyle
    Tags: None
    • Scale Shipyard / WLU
      Junior Member
      • Feb 2003
      • 122
      #2
      Kyle]http://www.subcommittee.com/forum/icon_razz.gif

      W.L. Upshaw
      Scale Shipyard

      Kyle]http://www.subcommittee.com/forum/icon_razz.gif[/img]

      W.L. Upshaw
      Scale Shipyard
      W.L. Upshaw

      The Scale Shipyard - Maker of the largest selection of quality large scale fiberglass model ship hulls, fittings and running gear.
      SUPPLYING YOUR HOBBY IS NOT OUR HOBBY

        Comment

        • nelix6030
          Member
          • Dec 2003
          • 43
          #3
          I have a subtech Albacore

          I have a subtech Albacore hull that I Scratch Built a WTC for.

          It runs great. I am excited to finish it because I have a Type IX U boat under the bench I am wanting to start.

          Thanks for the advice on the glue.

          Kyle

            Comment

            • yellowdog
              Junior Member
              • Jul 2004
              • 55
              #4
              Hello Lee. I have been

              Hello Lee. I have been told to stay awayfrom super glue because it will fail due to water getting into the joint. I know some guys may say, "well I glued that part ten years ago and it just fell off today, that glue is no good". Is super glue good for the long hall or should it be backed up with epoxy.
              Dan

                Comment

                Previous template Next
                Working...