Wiring LEDS

[rcher]

....instant waterproof battery terminal! (btw,

....instant waterproof battery terminal! (btw, this is the standard method used on D&E WTCs for the battery terminals.

Oh.....repeat as necessary for each wire.

-Jeff

Ah, I have just had an epiphany and now understand.

Next question, does the LED circuit need to be separate from the motor/ESC circuit? I can vistualize some current flowing from the LED terminals to the motor shaft if I power the LEDs from the same battery used to power the ESC/motor.

[JWLaRue]

>> does the LED circuit

>> does the LED circuit need to be separate from the motor/ESC circuit?

If you mean does the LED circuit need to be wired to a separate battery....no. Using a common ground is fine.

If you are asking if the LEDs can/should be wired in series with the motor/ESC, I'd say no.

-Jeff