1:150 German Luxury Liner TS Hanseatic
Collapse
X
-
-
My first step is to determine how much ballast I need to get the ship to sit right in the water. This may seem a bit backwards, but I will have ballast (in the form of lead shot) in spaces fore and aft that I won't have easy access to once the boat is fully assembled. So I built a test tank out of some inexpensive poplar boards. Note the drain hole in the north-eastern corner. There's a valve on the outside that connects to a 50 foot silicone hose that I have, used to drain and fill my fish tanks from a distance. I filled all the seams with silicone, and will let that dry overnight. Tomorrow I will line the inside with a coat of Flex Seal paintable, yeah, the stuff you see on tv. I've used it to seal cracks in my basement and it works like a dream. wish it smelled as good, though! Yuk! While waiting for all that stuff to cure, tomorrow I will do a little surface work on the hull.
Comment



















Comment