Uss marlin (r2)t2

[chips]

Bought this MARLIN kit about 10 years ago, and finally got around to building it. The only thing I haven't finished is the WTC and electronics. For applying draft marks, I use a Post-it note and lay out the measurements along the glue side. I cut out the template and attach it to the model, and apply dry transfer numbers. I decided to have a little fun with the rescue buoy and applied some pin stripe tape to it.

[ccontrol]

Very nice technique on the draft marks, I'll try that when I get to that stage on my Marlin. I like your R2-DBouy too!