I did my first lay-up a few days ago.
The idea is to create a strong shell to protect the foam/gypsum plug
(and as a basis to apply further filler).
As there were concave surfaces and
sharp edges I wanted to fix my glass weave to the hull first,
then apply polyester.
I used white wood glue for this. Turns out that the glass/polyester
mix now detaches from the hull in exactly the spots where glue was used.
that's not what you want....
The idea is to create a strong shell to protect the foam/gypsum plug
(and as a basis to apply further filler).
As there were concave surfaces and
sharp edges I wanted to fix my glass weave to the hull first,
then apply polyester.
I used white wood glue for this. Turns out that the glass/polyester
mix now detaches from the hull in exactly the spots where glue was used.
that's not what you want....
Comment