Type 206
Collapse
X
-
Yes it has one of
Yes it has one of the most clever -and strange- forward planes designs. You can see them in your picture. They are called spoons due to the shape they have. They don't pivot. The plane on one side is concave while the plane on the other side is convex. If you want to go bow down you expose the convex plane, if you want to go bows up you expose the other one.
As more and more of the plane is exposed, due to the increasing curvature and area, the higher the angle you can obtain.
This planes desing is a landmark of IKL desings. You can find it from the Typ 201 to the typ 209.
One thing to bear in mind: both planes are never deployed at the same time.
-
I always wondered if they
I always wondered if they also had a function in
countering the torque of the large prop.
in that case, they should be both (partially)
extended.
anybody know ?
Comment
-
I noticed something in the
I noticed something in the plans. The flags are pointing forward. When I was in the army i learned that flags on the uniform etc. always should be pointing bakwards like you are going towards the enemy. But on the plan the flags are poining bakwards like you are running from the enemy.
I guess this has to do with old traditions when the warship was wind powered.
Can someone confirm this theory?
Comment
-
Type 206 bow planes
The drawing shows that both planes are concave which I assume is incorrect. My Engel boat has the lines scribed for the planes , in the correct manner, but because the entire hull is the pressure hull, it would make it difficult to employ the planes operation. I plan on converting the hull so that it will have a WTC.
I have found various Type 206 models on the net and so far I have yet to see one with any deployed planes. I am considering making mine operational. Has anyone actually a Type 206 with this arrangement and did it work very well? I have some ideas on how to do it. I would like to see if anyone else has done it.
Comment
-
Re: Type 206 bow planes
The drawing shows that both planes are concave which I assume is incorrect. My Engel boat has the lines scribed for the planes , in the correct manner, but because the entire hull is the pressure hull, it would make it difficult to employ the planes operation. I plan on converting the hull so that it will have a WTC.
I have found various Type 206 models on the net and so far I have yet to see one with any deployed planes. I am considering making mine operational. Has anyone actually a Type 206 with this arrangement and did it work very well? I have some ideas on how to do it. I would like to see if anyone else has done it.
Comment
Comment