DSRV kit - Manufactured??

[jgiles69]

Hello All,

I noted photos of a DSRV in the photo gallery. Does anyone know if this is a kit, if so, who is the manufacturer? Any info would be appreciated. Thanks.

Best Regards
Jerry

[chips]

Loyalhanna Dockyard lists a DSRV

Loyalhanna Dockyard lists a DSRV in their catalog, I don't know if it's the same one in the gallery. The DSRV in Loyalhanna's catalog is 44" x 12", and the sticker price is $1575.00.

[sam reichart]

not sure which one you're

not sure which one you're pointing out, but FX Models sells the ALVIN, as well.

[tsenecal]

1) I may be completely

1) I may be completely off my rocker here, but I have inquired about Loyalhana's DSRV, and the email response was something along the lines of]http://www.fxmodels.com/DSRVMystic.shtml[/url]



Edited By tsenecal on 1153181160

[myles yancey]

Gentlemen as a distributor for

Gentlemen as a distributor for FX Models I should inform you
that FX Models has produced a resin cast static model of the DSRV Mystic. Price $350.00.
FX Models is presently planning on producing a RC version
of the DSRV Mystic in the near future.

Please click on the site listed below to see the picture.

http://webpages.charter.net/mpyancey/pics/

Please see the following pictrures
POOO6863, tHRU POOO6870

[sam reichart]

1) I may be completely

1) I may be completely off my rocker here, but I have inquired about Loyalhana's DSRV, and the email response was something along the lines of]http://www.fxmodels.com/DSRVMystic.shtml[/url]

Tim-
you're not splitting hairs. As Myles pointed out, Marc's "Mystic" is the DSRV I was thinking of. Marc had that whole set of photos of the model as he was building it posted here.
I screwed up, and said "Alvin"... thanks for the correction.

Sam

[Guest]

Gentlemen as a distributor for

Gentlemen as a distributor for FX Models I should inform you
that FX Models has produced a resin cast static model of the DSRV Mystic. Price $350.00.

Can't get the link to work.

Does cast resin mean a slush poured polyurethane casting, or is it a laid-up hull without the conversion bits for RC thrusters etc.?

Andy

[JWLaRue]

It looks like it's a

It looks like it's a urethane casting with no glass cloth.....

-Jeff

[fx models]

Hi Guys,

I apologize for

Hi Guys,

I apologize for not jumping in earlier. I was putting up a huge solar system model down in South Carolina! Sometimes its more than just subs... heh heh... Jeff LaRue is correct, the Static version of Mystic is indeed a slush cast resin pour. The RC Version mold presents a two piece top to bottom in epoxy fiberglass. I will get Dave Merriman in the loop again to see how he is fixed for making up the small thrusters. He has heard me say a few times I am comin' with the kit and he has learned to be sensible with me and just wait for it to show up... We have been so busy that no one here has had time to get the pieces out to him to work on thrusters. So this will get done in the next two to three weeks... More later!
Marc

[davietait]

The Royal Navy indeed has

The Royal Navy indeed has their own DSRV's. I believe the original ones we had were bought straight from the USA. I know of one ex-RN DSRV that now takes holiday makers out into Loch Ness Nessie spotting !!! Well it did one season until they had to stop due to the constant small hydraulic oil leaks polluting the Loch.

The Royal Navy now uses a DSRV called the LR5 (Royal Navy details of LR5),now that would be an interesting model to make.

Davie

[JWLaRue]

Hi Marc,

....don't forget that I'm

Hi Marc,

....don't forget that I'm in line to be customer "number 1" for the R/C version!

-Jeff

[myles yancey]

Hi every one

I am

Hi every one

I am sorry if my responses are coming slow, but as late
my father has past away,and now my mother-in-law is not long to be with us.
so please put up with me just a little longer and I will answer all your request and post pictures.
I am working on a web site the address is

http://webpages.charter.net/mpyancey/dsmt/index.htm

If the company emble pops up click on the Dark Horse
emble and the web page should pop up.

here you can find some of the products I am selling
I am attempting to get the prices entered this weekend,
in between legal issues and build models for customers.

I can be contacted at 1860-208-0859 if you need to call
me.

More to come
Myles

[myles yancey]

Hi Jeff

I'm sorry about

Hi Jeff

I'm sorry about this Jeff, but I beat you to the punch for the first one.

myles

[jure george]

Hi Myles, I just looked

Hi Myles, I just looked through your web site. I too have been waiting for a LONG time for FX to make a R.C DSRV version. Can you please let me know when you have complete information on this package and of course prices.

Sorry to hear of your father`s passing and your stepmothers health.

Please let me know when you can of the prices for the DSRV R.C version.
Thanks; George Tonkovic
SubCommittee # 0960
Eamil]george0039@hotmail.com[/email]