VEX Transmitter Channel 5 Switch Modification

[submetrologist]

I have attached pictures of a switch modification to channel 5 of the VEX transmitter. Removed the old push button switches and installed a three position toggle switch.
Initially, I tried mounting the switch between the original switch buttons. However, the new switch was hitting the control stick assembly. Place it in a new position. Toggle switch works perfectly.
The buttons for the original switch have been glued in place.

[submetrologist]

Would not let me attach picture that shows the switch on back of transmitter

[submetrologist]

Picture of switch in back of transmitter at channel 5 position. Took another picture. This time I was able to attach. For channel 6, I am going to install a 5k ohm linear rotating potentiometer. This is especially useful for RC Subs with a piston tank.